Nikolay_Po (Сегодня, 19:24, просмотров: 32) ответил Nikolay_Po на Говорила мне мама: "Не используй NRST как GPIO!" А я не послушался.
CH32V006E8R6.Удалось окирпичить! Поставил точку останова после стирания Option
Bytes и дал команду отладки "Перезапуск со сбросом". И всё. Даже
после успешного стирания "всего" через меню настроек
программирования.
Open On-Chip Debugger 0.11.0+dev-snapshot (2026-02-28-11:01) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html Info : only one transport option; autoselect 'sdi' Warn : Transport "sdi" was already selected Ready for Remote Connections Info : Listening on port 6666 for tcl connections Info : Listening on port 4444 for telnet connections Info : WCH-LinkE mode:RV version 2.20 Info : wlink_init ok Info : clock speed 6000 kHz Info : [wch_riscv.cpu.0] datacount=2 progbufsize=8 Info : [wch_riscv.cpu.0] Examined RISC-V core; found 1 harts Info : [wch_riscv.cpu.0] XLEN=32, misa=0x40801014 [wch_riscv.cpu.0] Target successfully examined. Info : starting gdb server for wch_riscv.cpu.0 on 3333 Info : Listening on port 3333 for gdb connections Info : accepting 'gdb' connection on tcp/3333 Info : device id = 0x76fdabcd Info : flash size = 62kbytes Warn : Prefer GDB command "target extended-remote :3333" instead of "target remote :3333" Warn : Failed to read memory via program buffer. Warn : Failed to read memory via abstract access. Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x0) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x2) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x4) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x6) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x8) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0xa) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0xc) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0xe) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x10) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x12) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x14) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x16) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x18) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x1a) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x1c) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x1e) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x20) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x22) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x24) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x26) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x28) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x2a) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x2c) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x2e) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x30) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x32) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x34) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x36) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x38) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x3a) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x3c) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x3e) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x40) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x42) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x44) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x46) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x48) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x4a) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x4c) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x4e) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x50) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x52) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x54) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x56) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x58) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x5a) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x5c) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x5e) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x60) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Target wch_riscv.cpu.0: Failed to read memory (addr=0x62) Error: progbuf=failed, sysbus=skipped (unsupported size), abstract=failed Error: Read-Protect Status Currently Enabled Error: failed erasing sectors 0 to 1 Error: flash_erase returned -4
-
- Отбой. WCH-LinkUtility раскирпичила по нажатию кнопки "разблокировать". - Nikolay_Po(Сегодня, 19:30)