ARM, RISC-V контроллеры

Таки не понял. У NXP: /***************************************************************************** * irq.c: Interrupt handler C file for NXP LPC23xx/24xx Family Microprocessors * * Copyright(C) 2006, NXP Semiconductor * All rights reserved. * * History * 2006.07.13 ver 1.00 Prelimnary version, first Release * ******************************************************************************/ #include "lpc2478.h" /* LPC23XX/24xx Peripheral Registers */ #include "type.h" #include "irq.h" /* Initialize the interrupt controller */ /****************************************************************************** ** Function name: init_VIC ** ** Descriptions: Initialize VIC interrupt controller. ** parameters: None ** Returned value: None ** ******************************************************************************/ void init_VIC(void) { DWORD i = 0; DWORD *vect_addr, *vect_prio; /* initialize VIC*/ VICIntEnClr = 0xffffffff; VICVectAddr = 0; VICIntSelect = 0; /* set all the vector and vector control register to 0 */ for ( i = 0; i < VIC_SIZE; i++ ) { vect_addr = (DWORD *)(VIC_BASE_ADDR + VECT_ADDR_INDEX + i*4); vect_prio = (DWORD *)(VIC_BASE_ADDR + VECT_PRIO_INDEX + i*4); *vect_addr = 0x0; *vect_prio = 0xF; } return; } /****************************************************************************** ** Function name: install_irq ** ** Descriptions: Install interrupt handler ** parameters: Interrupt number, interrupt handler address, ** interrupt priority ** Returned value: true or false, return false if IntNum is out of range ** ******************************************************************************/ unsigned int install_irq(unsigned int IntNumber, void *HandlerAddr, unsigned int Priority ) { DWORD *vect_addr; DWORD *vect_prio; VICIntEnClr = 1 << IntNumber; /* Disable Interrupt */ if ( IntNumber >= VIC_SIZE ) { return ( FALSE ); } else { /* find first un-assigned VIC address for the handler */ vect_addr = (DWORD *)(VIC_BASE_ADDR + VECT_ADDR_INDEX + IntNumber*4); vect_prio = (DWORD *)(VIC_BASE_ADDR + VECT_PRIO_INDEX + IntNumber*4); *vect_addr = (DWORD)HandlerAddr; /* set interrupt vector */ *vect_prio = Priority; VICIntEnable = 1 << IntNumber; /* Enable Interrupt */ return( TRUE ); } } __irq __arm void IRQ_Handler(void) { void (*interrupt_function)(); unsigned int vector; vector=VICVectAddr; if(vector==0)goto EXIT_IRQ; interrupt_function = (void(*)())vector; (*interrupt_function)(); EXIT_IRQ: VICVectAddr=0; } /****************************************************************************** ** End Of File ******************************************************************************/ Где такое для STM найти можно?