Bill (03.07.2018 11:17, просмотров: 433) ответил sladkoejka на Ваш контроллер использует autovector? Это когда в LJMP инструкции расположенной в таблице векторов стоит адрес новой таблицы векторов, а процессор подменяет младший байт под соответствующий суб-вектор. Т.е. когда приходит прерывание от USB, в LJMPВообще-то, примеры примеры были сделаны для вашего контроллера. Исходный код#include <ioCY7C68013A.h>
#include <intrinsics.h>
typedef unsigned int uint16_t;
typedef signed int int16_t;
volatile char Flags;
#pragma vector = USB_int
__interrupt void USB_Handler(void)
{
Flags = 0;
}
#pragma vector = TF0_int
__interrupt void Tim0_Handler(void)
{
Flags = 1;
}
void delay(uint16_t n)
{
for (uint16_t i=0; i < n; i++)
__no_operation();
}
void main(void)
{
for (;;)
{
delay(1000U);
delay(10000U);
}
}
Сгенерированный код
F:\MCS51prj\Test\test.c
1 #include <ioCY7C68013A.h>
2 #include <intrinsics.h>
3
4 typedef unsigned int uint16_t;
5 typedef signed int int16_t;
6
\ In segment IDATA_Z, align 1, keep-with-next
7 volatile char Flags;
\ Flags:
\ 000000 DS 1
\ 000001 REQUIRE __INIT_IDATA_Z
8
9 #pragma vector = USB_int
\ In segment NEAR_CODE, align 1, keep-with-next
10 __interrupt void USB_Handler(void)
\ USB_Handler:
11 {
\ 000000 C0E0 PUSH A
\ 000002 E8 MOV A,R0
\ 000003 ; Saved register size: 4
\ 000003 ; Auto size: 0
12 Flags = 0;
\ 000003 78.. MOV R0,#Flags
\ 000005 7600 MOV @R0,#0x0
13 }
\ 000007 F8 MOV R0,A
\ 000008 D0E0 POP A
\ 00000A 32 RETI
14
15 #pragma vector = TF0_int
\ In segment NEAR_CODE, align 1, keep-with-next
16 __interrupt void Tim0_Handler(void)
\ Tim0_Handler:
17 {
\ 000000 C0E0 PUSH A
\ 000002 E8 MOV A,R0
\ 000003 ; Saved register size: 4
\ 000003 ; Auto size: 0
18 Flags = 1;
\ 000003 78.. MOV R0,#Flags
\ 000005 7601 MOV @R0,#0x1
19 }
\ 000007 F8 MOV R0,A
\ 000008 D0E0 POP A
\ 00000A 32 RETI
\ In segment NEAR_CODE, align 1, keep-with-next
20 void delay(uint16_t n)
\ delay:
21 {
\ 000000 ; Saved register size: 0
\ 000000 ; Auto size: 0
22 for (uint16_t i=0; i < n; i++)
\ 000000 EA MOV A,R2
\ 000001 4B ORL A,R3
\ 000002 6011 JZ ??delay_0
\ 000004 EA MOV A,R2
\ 000005 F8 MOV R0,A
\ 000006 EB MOV A,R3
\ 000007 F9 MOV R1,A
23 __no_operation();
\ ??delay_1:
\ 000008 00 NOP
\ 000009 E8 MOV A,R0
\ 00000A 24FF ADD A,#-0x1
\ 00000C 18 DEC R0
\ 00000D E9 MOV A,R1
\ 00000E 34FF ADDC A,#-0x1
\ 000010 F9 MOV R1,A
\ 000011 E8 MOV A,R0
\ 000012 49 ORL A,R1
\ 000013 70F3 JNZ ??delay_1
24 }
\ ??delay_0:
\ 000015 53..FE ANL ?DPS,#0xfe
\ 000018 22 RET
25
\ In segment NEAR_CODE, align 1, keep-with-next
26 void main(void)
\ main:
27 {
\ 000000 ; Auto size: 0
28 for (;;)
29 {
30 delay(1000U);
\ ??main_0:
\ 000000 ; Setup parameters for call to function delay
\ 000000 7AE8 MOV R2,#-0x18
\ 000002 7B03 MOV R3,#0x3
\ 000004 12.... LCALL delay
31 delay(10000U);
\ 000007 ; Setup parameters for call to function delay
\ 000007 7A10 MOV R2,#0x10
\ 000009 7B27 MOV R3,#0x27
\ 00000B 12.... LCALL delay
\ 00000E 80F0 SJMP ??main_0
32 }
33 }
\ In segment INTVEC, offset 0xb, root
\ `??Tim0_Handler::??INTVEC 11`:
\ 00000B 02.... LJMP (Tim0_Handler)
\ In segment INTVEC, offset 0x43, root
\ `??USB_Handler::??INTVEC 67`:
\ 000043 02.... LJMP (USB_Handler)
Maximum stack usage in bytes:
ISTACK Function
------ --------
4 Tim0_Handler
4 USB_Handler
0 delay
0 main
0 -> delay
Segment part sizes:
Bytes Function/Label
----- --------------
1 Flags
11 Tim0_Handler
3 Tim0_Handler::??INTVEC 11
11 USB_Handler
3 USB_Handler::??INTVEC 67
25 delay
16 main
1 byte in segment IDATA_Z
6 bytes in segment INTVEC
63 bytes in segment NEAR_CODE
63 bytes of CODE memory (+ 6 bytes shared)
1 byte of IDATA memory
Errors: none
Warnings: none
Карта памяти
################################################################################
# #
# IAR Universal Linker V6.4.2.83 #
# #
# Link time = 03/Jul/2018 13:13:31 #
# Target CPU = x51 #
# List file = F:\MCS51prj\Test\Release\List\test.map #
# Output file 1 = F:\MCS51prj\Test\Release\Exe\test.a51 #
# Format: intel-standard #
# Command line = "-IC:\Program Files\IAR Systems\Embedded Workbenc #
# h 7.3\8051\CONFIG\" #
# -D_NR_OF_BANKS=0 -D_CODEBANK_END=0 #
# -D_CODEBANK_START=0 #
# F:\MCS51prj\Test\Release\Obj\test.r51 -o #
# F:\MCS51prj\Test\Release\Exe\test.a51 #
# -Fintel-standard -l #
# F:\MCS51prj\Test\Release\List\test.map -xms #
# "-IC:\Program Files\IAR Systems\Embedded Workbenc #
# h 7.3\8051\LIB\" #
# -f #
# "C:\Program Files\IAR Systems\Embedded Workbench #
# 7.3\8051\config\devices\Cypress\lnk51ew_CY7C68013 #
# A.xcl" #
# (-D_IDATA0_START=0x00 -D_IDATA0_END=0xFF #
# -D_PDATA0_START=0x0000 -D_PDATA0_END=0x00FF #
# -D_IXDATA0_START=0xE000 -D_IXDATA0_END=0xE1FF #
# -D_XDATA0_START=0xE000 -D_XDATA0_END=0xE1FF #
# -D_CODE0_START=0x000000 -D_CODE0_END=0x3FFF #
# -D?REGISTER_BANK=0x0 -D_REGISTER_BANK_START=0x0 #
# -D_BREG_START=0x00 -D?VB=0x20 #
# -Z(BIT)BREG=_BREG_START -Z(BIT)BIT_N=0-7F #
# -Z(DATA)REGISTERS+8=_REGISTER_BANK_START #
# -Z(DATA)BDATA_Z,BDATA_N,BDATA_I=20-2F #
# -Z(DATA)VREG=08-7F -Z(DATA)PSP,XSP=08-7F #
# -Z(DATA)DOVERLAY=08-7F #
# -Z(DATA)DATA_I,DATA_Z,DATA_N=08-7F #
# -U(IDATA)0-7F=(DATA)0-7F #
# -Z(IDATA)IDATA_I,IDATA_Z,IDATA_N=08-_IDATA0_END #
# -Z(IDATA)ISTACK+_IDATA_STACK_SIZE#08-_IDATA0_END #
# -Z(IDATA)IOVERLAY=08-FF -Z(CODE)INTVEC=0 #
# -Z(CODE)CSTART=_CODE0_START-_CODE0_END #
# -Z(CODE)BIT_ID,BDATA_ID,DATA_ID,IDATA_ID,IXDATA_I #
# D,PDATA_ID,XDATA_ID=_CODE0_START-_CODE0_END #
# -Z(CODE)HUGE_ID=_CODE0_START-_CODE0_END #
# -Z(CODE)RCODE,DIFUNCT=_CODE0_START-_CODE0_END #
# -P(CODE)CODE_C,CODE_N,NEAR_CODE=_CODE0_START-_COD #
# E0_END #
# -Z(CODE)CHECKSUM#_CODE0_END #
# -Z(XDATA)PDATA_Z,PDATA_I=_PDATA0_START-_PDATA0_EN #
# D #
# -P(XDATA)PDATA_N=_PDATA0_START-_PDATA0_END #
# -Z(XDATA)PSTACK+_PDATA_STACK_SIZE=_PDATA0_START-_ #
# PDATA0_END #
# -Z(XDATA)EXT_STACK+_EXTENDED_STACK_SIZE=_EXTENDED #
# _STACK_START #
# -Z(XDATA)XSTACK+_XDATA_STACK_SIZE=_XDATA0_START-_ #
# XDATA0_END #
# -Z(XDATA)IXDATA_I,IXDATA_Z=_IXDATA0_START-_IXDATA #
# 0_END #
# -P(XDATA)IXDATA_N=_IXDATA0_START-_IXDATA0_END #
# -Z(XDATA)XDATA_I,XDATA_Z=_XDATA0_START-_XDATA0_EN #
# D #
# -P(XDATA)XDATA_N=_XDATA0_START-_XDATA0_END #
# -Z(XDATA)XDATA_HEAP+_XDATA_HEAP_SIZE=_XDATA0_STAR #
# T-_XDATA0_END #
# -Z(CONST)XDATA_ROM_C=_XDATA0_START-_XDATA0_END #
# -Z(CODE)FAR22_ID=[_CODE0_START-_CODE0_END]/10000 #
# -Z(CODE)FAR_ID=[_CODE0_START-_CODE0_END]/10000 #
# -cx51) -D?DPMASK=0x01 #
# -D_NR_OF_VIRTUAL_REGISTERS=8 -D?DPS=0x86 #
# -D?PBANK=0x92 -D?DPL1=0x84 -D?DPH1=0x85 -s #
# __program_start #
# "C:\Program Files\IAR Systems\Embedded Workbench #
# 7.3\8051\LIB\CLIB\cl-pli-nsid-2e16inc.r51" #
# -D_IDATA_STACK_SIZE=0x40 -D?ESP=0 -D?ESP_MASK=0 #
# -D_EXTENDED_STACK_START=0 #
# -D_EXTENDED_STACK_SIZE=0 #
# -D_PDATA_STACK_SIZE=0x80 #
# -D_XDATA_STACK_SIZE=0xEFF #
# -D_XDATA_HEAP_SIZE=0xFF -D_FAR_HEAP_SIZE=0xFFF #
# -D_HUGE_HEAP_SIZE=0xFFF #
# -D_FAR22_HEAP_SIZE=0xFFF #
# #
# Copyright (C) 1987-2015 IAR Systems AB. #
################################################################################
****************************************
* *
* CROSS REFERENCE *
* *
****************************************
Program entry at : CODE 0000005F Relocatable, from module : CSTARTUP
****************************************
* *
* RUNTIME MODEL *
* *
****************************************
__SystemLibrary = CLib
__calling_convention = idata_reentrant
__code_model = near
__core = plain
__data_model = small
__dptr_size = 16
__dptr_visibility = separate
__extended_stack = disabled
__location_for_constants = data
__number_of_dptrs = 2
__rt_version = 1
****************************************
* *
* AUTOMATIC SYMBOL REDIRECTIONS *
* *
****************************************
There are no automatic symbol redirections.
****************************************
* *
* MODULE MAP *
* *
****************************************
DEFINED ABSOLUTE ENTRIES
*************************************************************************
DEFINED ABSOLUTE ENTRIES
PROGRAM MODULE, NAME : ?ABS_ENTRY_MOD
Absolute parts
ENTRY ADDRESS REF BY
===== ======= ======
_FAR22_HEAP_SIZE 00000FFF
_HUGE_HEAP_SIZE 00000FFF
_FAR_HEAP_SIZE 00000FFF
_XDATA_HEAP_SIZE 000000FF
_XDATA_STACK_SIZE 00000EFF
_PDATA_STACK_SIZE 00000080
_EXTENDED_STACK_SIZE 00000000
_EXTENDED_STACK_START 00000000
?ESP_MASK 00000000
?ESP 00000000
_IDATA_STACK_SIZE 00000040
?DPH1 00000085
?DPL1 00000084
?PBANK 00000092
?DPS 00000086 ?RESET_DPS (CSTARTUP)
delay (test)
_NR_OF_VIRTUAL_REGISTERS
00000008
?DPMASK 00000001 ?RESET_DPS (CSTARTUP)
?VB 00000020
_BREG_START 00000000
_REGISTER_BANK_START 00000000
?REGISTER_BANK 00000000 Segment part 6 (CSTARTUP)
_CODE0_END 00003FFF
_CODE0_START 00000000
_XDATA0_END 0000E1FF
_XDATA0_START 0000E000
_IXDATA0_END 0000E1FF
_IXDATA0_START 0000E000
_PDATA0_END 000000FF
_PDATA0_START 00000000
_IDATA0_END 000000FF
_IDATA0_START 00000000
_CODEBANK_START 00000000
_CODEBANK_END 00000000
_NR_OF_BANKS 00000000
*************************************************************************
FILE NAME : F:\MCS51prj\Test\Release\Obj\test.r51
PROGRAM MODULE, NAME : test
SEGMENTS IN THE MODULE
======================
IDATA_Z
Relative segment, address: IDATA 00000008 - 00000008 (0x1 bytes), align: 0
Segment part 8. Intra module refs: Tim0_Handler
USB_Handler
ENTRY ADDRESS REF BY
===== ======= ======
Flags 00000008
-------------------------------------------------------------------------
<NEAR_CODE> 1 (was NEAR_CODE)
Relative segment, address: CODE 0000006B - 00000075 (0xb bytes), align: 0
Segment part 9. Intra module refs: USB_Handler::??INTVEC 67
ENTRY ADDRESS REF BY
===== ======= ======
USB_Handler 0000006B
interrupt function
ISTACK = 00000000 ( 00000004 )
-------------------------------------------------------------------------
<NEAR_CODE> 1 (was NEAR_CODE)
Relative segment, address: CODE 00000076 - 00000080 (0xb bytes), align: 0
Segment part 10. Intra module refs: Tim0_Handler::??INTVEC 11
ENTRY ADDRESS REF BY
===== ======= ======
Tim0_Handler 00000076
interrupt function
ISTACK = 00000000 ( 00000004 )
-------------------------------------------------------------------------
<NEAR_CODE> 1 (was NEAR_CODE)
Relative segment, address: CODE 00000081 - 00000099 (0x19 bytes), align: 0
Segment part 11. Intra module refs: main
ENTRY ADDRESS REF BY
===== ======= ======
delay 00000081
-------------------------------------------------------------------------
<NEAR_CODE> 1 (was NEAR_CODE)
Relative segment, address: CODE 0000009A - 000000A9 (0x10 bytes), align: 0
Segment part 12.
ENTRY ADDRESS REF BY
===== ======= ======
main 0000009A ?call_main (?cmain)
calls direct
-------------------------------------------------------------------------
INTVEC
Common segment, address: CODE 00000000 - 0000000D (0xe bytes), align: 0
Segment part 1. ROOT
ENTRY ADDRESS REF BY
===== ======= ======
Tim0_Handler::??INTVEC 11
0000000B
-------------------------------------------------------------------------
INTVEC
Common segment, address: CODE 00000000 - 00000045 (0x46 bytes), align: 0
Segment part 2. ROOT
ENTRY ADDRESS REF BY
===== ======= ======
USB_Handler::??INTVEC 67
00000043
*************************************************************************
FILE NAME : C:\Program Files\IAR Systems\Embedded Workbench 7.3\8051\LIB\CLIB\cl-pli-nsid-2e16inc.r51
LIBRARY MODULE, NAME : ?cexit
SEGMENTS IN THE MODULE
======================
CSTART
Relative segment, address: CODE 00000046 - 0000004A (0x5 bytes), align: 0
Segment part 0.
ENTRY ADDRESS REF BY
===== ======= ======
exit 00000046 ?call_main (?cmain)
?C_EXIT 00000046
?ROM_MONITOR_NOPS 00000046
-------------------------------------------------------------------------
LIBRARY MODULE, NAME : ?cmain
SEGMENTS IN THE MODULE
======================
CSTART
Relative segment, address: CODE 0000004B, align: 0
Segment part 5.
ENTRY ADDRESS REF BY
===== ======= ======
?cmain 0000004B Segment part 14 (CSTARTUP)
calls direct
-------------------------------------------------------------------------
CSTART
Relative segment, address: CODE 0000004B - 00000058 (0xe bytes), align: 0
Segment part 12.
ENTRY ADDRESS REF BY
===== ======= ======
__INIT_IDATA_Z 0000004B Flags (test)
-------------------------------------------------------------------------
CSTART
Relative segment, address: CODE 00000059 - 0000005E (0x6 bytes), align: 0
Segment part 38. Intra module refs: ?cmain
ENTRY ADDRESS REF BY
===== ======= ======
?call_main 00000059
-------------------------------------------------------------------------
LIBRARY MODULE, NAME : CSTARTUP
SEGMENTS IN THE MODULE
======================
REGISTERS
Relative segment, address: DATA 00000000, align: 0
Segment part 0. Intra module refs: Segment part 6
ENTRY ADDRESS REF BY
===== ======= ======
?REGISTERS 00000000
-------------------------------------------------------------------------
ISTACK
Relative segment, address: IDATA 000000C0, align: 0
Segment part 1. Intra module refs: Segment part 6
ENTRY ADDRESS REF BY
===== ======= ======
?ISTACK_START 000000C0
-------------------------------------------------------------------------
INTVEC
Common segment, address: CODE 00000000 - 00000002 (0x3 bytes), align: 0
Segment part 5. ROOT Intra module refs: Segment part 6
-------------------------------------------------------------------------
CSTART
Relative segment, address: CODE 0000005F - 00000064 (0x6 bytes), align: 0
Segment part 6. ROOT Intra module refs: Segment part 5
ENTRY ADDRESS REF BY
===== ======= ======
__program_start 0000005F Absolute parts (?ABS_ENTRY_MOD)
?RESET_SP 00000062
-------------------------------------------------------------------------
CSTART
Relative segment, address: CODE 00000065 - 00000067 (0x3 bytes), align: 0
Segment part 12. Intra module refs: Absolute parts
ENTRY ADDRESS REF BY
===== ======= ======
?RESET_DPS 00000065
-------------------------------------------------------------------------
CSTART
Relative segment, address: CODE 00000068 - 0000006A (0x3 bytes), align: 0
Segment part 14. Intra module refs: Absolute parts
-------------------------------------------------------------------------
LIBRARY MODULE, NAME : VIRTUAL_REGISTERS
SEGMENTS IN THE MODULE
======================
BREG
Relative segment, address: BIT 00000020.0 - 00000020.7 (0x8 bits), align: 0
Segment part 0.
ENTRY ADDRESS REF BY
===== ======= ======
?B0 00000020.0 Absolute parts (CSTARTUP)
****************************************
* *
* SEGMENTS IN ADDRESS ORDER *
* *
****************************************
SEGMENT SPACE START ADDRESS END ADDRESS SIZE TYPE ALIGN
======= ===== ============= =========== ==== ==== =====
INTVEC CODE 00000000 - 00000045 46 com 0
CSTART CODE 00000046 - 0000006A 25 rel 0
<NEAR_CODE> 1 CODE 0000006B - 000000A9 3F rel 0
REGISTERS DATA 00000000 - 00000007 8 rel 0
BREG BIT 00000020.0 - 00000020.7 8 rel 0
IDATA_I IDATA 00000008 dse 0
IDATA_Z IDATA 00000008 - 00000008 1 rel 0
ISTACK IDATA 000000C0 - 000000FF 40 rel 0
****************************************
* *
* END OF CROSS REFERENCE *
* *
****************************************
170 bytes of CODE memory
8 bytes of DATA memory
65 bytes of IDATA memory
8 bits of BIT memory
Errors: none
Warnings: none
-
- Во первых ваш пример ничего не делает, поэтому понять работает он или нет на железе нет возможности. Во вторых (читать внутри)... sladkoejka(1324 знак., 03.07.2018 11:45 - 11:51)